301203 T2 Impact-Absorbing Front Bumper

Impact -absorbing front bumper for XRAY T2 is made from high-quality nylon that absorbs the energy from crashes.

302256 T2 Alu Steering Block

Alu Steering Block for XRAY T2 is CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks. Includes two nylon bushings and two ball-bearings. Fits left or right sides.

302334 T2 Alu C-Hub Front Block - Caster 0°
302335 T2 Alu C-Hub Front Block Right - Caster 2°
302336 T2 Alu C-Hub Front Block Left - Caster 2°
302337 T2 Alu C-Hub Front Block Right - Caster 4°
302338 T2 Alu C-Hub Front Block Left - Caster 4°
302339 T2 Alu C-Hub Front Block Right - Caster 6°
302340 T2 Alu C-Hub Front Block Left - Caster 6°

CNC-machined highest-quality duaraluminum C-hub for left steering block of T2. Caster pre-set at 0°, 2°, 4° and 6°. Engraved to easy identification. Includes two nylon bushings.

302343 Composite C-Hub Front Block, Right - 2° Deg.
302344 Composite C-Hub Front Block, Left - 2° Deg.
302347 Composite C-Hub Front Block, Right - 6° Deg.
302348 Composite C-Hub Front Block, Left - 6° Deg.

Molded C-hub for left steering block of T2. Caster pre-set at 2° and 6°. Engraved to easy identification.

302401 T2 Anti-Roll Bar Front (Set)
303401 T2 Anti-Roll Bar Rear (Set)

If your XRAY T2 is understeering, then try this optional front or rear anti-roll bar set. The front & rear anti-roll bars will decrease front or rear chassis roll and decrease front or rear traction, increasing your car’s steering. This complete rear anti-roll bar set for the XRAY T2 includes all necessary hardware, and includes three different anti-roll bars: 1.2, 1.4, and 1.6mm.

303060 Graphite Motor Guard

CNC-machined graphite motor guard for T1FK’05 and T2 protects the motor endbell from collisions. Includes mounting hardware.

303358 T2 Alu Upright Rear 1° Outboard Toe-In (L+R)
303359 T2 Alu Upright Rear 2° Outboard Toe-In (L+R)

CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 1° or 2° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.

Composite bushings are used to secure the ball-bearings in both sides of this rear upright; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum uprights. Includes composite bushings and ball-bearings. Fits XRAY T2.

305352 T2 Alu Wheel Hub - Offset +1mm (2)

CNC-machined clamping-style alu wheel hub for T2 features 1mm offset to give wider track-width. Set of 2 includes clamping screws.

306163 T2 Graphite Battery Strap w/ Alu Stands (Set)

Pre-assembled graphite battery strap for XRAY T2 features the XRAY smart battery holder system and new battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips.

The new battery tweak-free mounting system works with the Multi-Flex Technology(TM) concept; the redesigned capture wheel gives sufficient play and will not stiffen the chassis even when the wheel is tightened excessively.